CleanSpace Hi Capacity (HI CAP) Particulate Filter P3 (single)

CLEANSPACE HIGH CAPACITY (HI CAP) PARTICULATE P3 FILTER

The CleanSpace High Capacity Particulate P3 TM3 P SL R is suitable for protection against airborne particulate (dust, mists and fumes).

IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use.

Features:

• The CleanSpace High Capacity Particulate Filter must be used in conjunction with the CleanSpace Filter Adaptor (PAF-0038)
• Used with the revolutionary CleanSpace - A light weight PAPR with no hoses/belts
• Suitable for protection against airborne particulate (dust, mists and fumes).
• Materials: Fibreglass particulate media and plastic casing, silicone seal
• Easily fitted and removed from the Power Unit

Specifications:

• Weight: average: 100g Dimensions: 170mm x 40mm x 70mm
• Packaged Shelf life: 3 years from manufacturing date.
• Materials: Spun polymer fibres
• Storage and Use: ?10øC to +55øC (?4øF to +131øF) at <90% relative humidity. Store away from direct sunlight, grease and oil.
• Only to be used with CleanSpace PAPR Power Units
• These filters are not water proof and should be replaced if in contact with water.

Application:

Suitable for mining, welding, manufacturing, smelting, construction, recycling plants, emergency services, agriculture, processing plats, grinding.

Refer to Filter Selection Table for more details www.cleanspacetechnology.com/wp-content/uploads/pdfs/english/training/01-CleanSpace-Filter-Selection-Table.pdf.

Standards:

AS/NZS 1716:2012
EN 12942

Classification:

PAPR-P3

Limitations:

CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely.

Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.